Epson EPL-N3000 - Replacement Messages

222 Replacing the Consumable Product
Replacement Messages
When you see the following messages on the LCD panel or the
window of EPSON Status Monitor 3, replace the appropriate
consumable products. You can continue to print for a short time
after a message appears, but EPSON recommends early
replacement to maintain print quality and extend the life of your
printer.
Note:
❏ Printing is still possible for a while after the Toner Low message
appears. However, replace the imaging cartridge at once if the print
quality deteriorates.
❏ To clear the warning, select Clear All Warning from the control
panel’s Reset Menu.
If you continue to use the printer without replacing consumable
products and a consumable product reaches the end of its service
life, the printer stops printing and displays the following
messages on the LCD panel or the window of EPSON Status
Monitor 3. When this happens, the printer cannot resume printing
until you replace the depleted consumable products.
Note:
❏ In the default setting, this message does not appear.
LCD Panel
Message
Description
Toner Low The amount of toner remaining
in the imaging cartridges is low.
Worn Fuser The fuser unit has reached the
end of its service life.
LCD Panel
Message
Description
Replace Toner The imaging cartridge is empty.