Epson EPL-N3000 - General Printing Problems

276 Troubleshooting
General printing problems
The printer does not print.
Cause What to do
The Print to file check box is
selected in the Print dialog
box.
Clear the Print to file check box in the
Print dialog box.
An incorrect printer driver is
selected.
Make sure that the PostScript printer
driver that you are using to print is set
as the default printer. Follow the steps
below:
(1) Click Start, select Settings, then click
Printers.
If your computer is running Windows
XP, click Start, then click Control Panel.
In the window that appears, click
Printers and Other Hardware, then click
View installed printers or fax printers. If
Printers and Faxes is displayed at the
bottom of the window, click on it
instead.
(2) Right-click the icon of the PostScript
printer driver that you are using to print.
(3) Make sure that there is a check mark
next to Set as Default Printer. If not, click
on Set as Default Printer to select it.
The Emulation menu in the
printer’s Control Panel is set to
a mode other than Auto or PS3
for the interface that you are
using.
Change the mode setting to either Auto
or PS3.