306 Troubleshooting
Unable Clear Error
The printer cannot clear an error message because the error status
still remains. Try solving the problem again.
Warming Up
The printer is warming up the machine to be ready to print.
Worn Fuser
This message indicates that the fuser unit has reached the end of
its service life. Prepare a new fuser unit.
See “Replacing the fuser unit” on page 228 for instructions.
Write Error ROM P
The printer is unable to write data into the ROM module correctly.
You cannot remove the ROM P because the ROM P is a program
ROM module. Contact our Customer Support Center.
Writing ROM P
The printer is writing data into the ROM module in the ROM slot
P.
Canceling Printing
You can cancel printing from your computer by using the printer
driver.
To cancel a print job before it is sent from your computer, see
“Canceling Printing” on page 82.
To Next Page
Loading...
