272 Troubleshooting
Insufficient memory to print all copies
Paper Handling Problems
When using special media, note the following points.
❏ When printing on custom paper with a narrow width, using
thicker paper is recommended.
❏ When using thick paper, outputting to the Face-up tray is
recommended. Otherwise, the paper may curl.
❏ When outputting thick paper to the Stacker, extend the
retortion part of the Stacker to prevent the paper from
falling.
Cause What to do
The printer does not have
sufficient memory to collate
print jobs.
Only one set of copies will be printed.
Reduce the contents of print jobs, or add
more memory. For information on
installing more memory, see “Memory
Module” on page 204.
To Next Page
Loading...
