270 Troubleshooting
The printed image is light or faint
The non-printed side of the page is dirty
Cause What to do
Your paper may be moist or
damp.
Do not store your paper in a humid or
damp environment.
The Toner Save mode may be
on.
Turn off the Toner Save mode using the
printer driver or the printer’s control
panel menus.
There may be no toner left in
the imaging cartridge.
If the message on the LCD panel or in
EPSON Status Monitor 3 indicates that
the amount of toner left is low, see
“Replacing the imaging cartridge” on
page 224.
The Density setting may be too
low.
Increase the Density setting in the
Printing Menu on the control panel.
Cause What to do
Toner may have spilled onto
the paper feed path.
Clean internal printer components by
printing three pages with only one
character per page.
To Next Page
Loading...
