Epson EPL-N3000 - Manually Feeding Paper

Paper Handling 19
2
2
2
2
2
2
2
2
2
2
2
2
With one or two optional 550-Sheet Paper Cassette Unit A4
installed:
MP Tray
Lower Cassette 1
Lower Cassette 2
Lower Cassette 3
Note:
❏ If you make paper size settings or paper source settings in your
application, these settings may override the printer driver settings.
❏ You can change the priority of the MP tray by using the MP Mode
setting in the control panel’s Setup Menu. For details, see “Setup
Menu” on page 352.
❏ When Auto is set for the paper source setting on the control panel
or the printer driver, A4, A5, B5, LT, LGL, GLG, EXE paper can
be fed automatically with the standard or optional lower cassettes.
Other paper sizes can be fed when the specified cassette is set for the
paper source.
Manually feeding paper
Manual feeding is similar to normal paper feeding, except that
you need to press the N Start/Stop button to start printing.
You can either choose to press the N Start/Stop button once to
start printing all pages, or press the N Start/Stop button to print
each page one by one.
Follow these steps to feed paper manually:
1. Access the printer driver by one of the following methods:
❏ To access the printer driver from your application, select
Print or Page Setup from the File menu. You also need to
click Setup, Options, Properties, or a combination of these
buttons.