382 Working with Fonts
Take note of the following regarding fonts and the Windows
operating system:
❏ TrueType fonts work with all versions of the Windows
operating system.
❏ You can install a maximum of approximately 800 TrueType
fonts in Windows ME, 98, or 95.
❏ To use PostScript Type 1 fonts in Windows Me/98/95 or
Windows NT, you need to use Adobe Type Manager (ATM),
ATM Deluxe, or ATM Light. You can download Adobe’s
freely distributable ATM Light for Windows from Adobe’s
Web site. If you are running Windows XP or Windows 2000,
you do not need to install ATM since it is part of the operating
system already.
You can also install fonts from within the Fonts window. To access
this window, open the Control Panel and double-click the Fonts
icon. Once installed, the fonts are available in all your Windows
applications.
Selecting Fonts
Whenever possible select fonts in your application. See your
software documentation for instructions.
If you are sending unformatted text to the printer directly from
DOS or if you are using a simple software package that does not
include font selection, you can select fonts using the printer’s
control panel menus when in the LJ4, ESC/P 2, FX, or I239X
emulation mode.
To Next Page
Loading...
