32 Paper Handling
Note:
❏ You should only use labels designed for monochrome laser printers
or monochrome plain-paper copiers.
❏ To prevent the label adhesive from coming into contact with printer
parts, always use labels that completely cover the backing sheet, with
no gaps between the individual labels.
❏ Press a sheet of paper on top of each sheet of labels. If the paper sticks,
do not use those labels in your printer.
❏ You may have to make the setting Thick for Paper Type in the Setup
Menu.
Thick paper/Extra thick paper
The following table shows important settings you have to make
when using thick or extra thick paper.
Note:
When printing on thick paper, outputting it to the Face-up tray is
recommended because thick paper curls easily.
Transparencies
You can load transparencies up to 100 sheets into the MP tray,
standard lower cassette or 550-Sheet Paper Cassette Unit.
Paper Source MP tray (Total thickness: 17.5 mm
maximum), standard lower cassette,
optional lower cassette (Total thickness:
49.4 mm maximum)
Printer driver settings Paper Size: A4, A5, B5, LT, HLT, EXE, LGL,
GLG, GLT, F4
Paper Type: Thick or Extra thick
To Next Page
Loading...
