104 Using the PostScript Printer Software (Windows)
6. Click OK once the following message appears.
“The server on which the XXX printer resides does not have the
correct printer driver installed.”
7. Click Have Disk and specify the path to the appropriate INF
file necessary for installation. If your CD-ROM drive is D:, the
path will be D:\ADOBEPS\ENGLISH\WINNT4\PS_SETUP
(change the drive letter as needed for your system).
8. Select the INF file for the version of the Windows operating
system that you are running and continue with the
installation according to the on-screen instructions.
9. When installation is done, click Finish.
Notice for Windows NT 4.0 Users
Unavailable paper sizes may appear in the paper size list for the
selected paper source. See “Paper Sources” on page 15 to confirm
the available paper sizes.
Print dialog box settings
The Print dialog box, which is accessed by selecting Print on the
File menu of the application that you are using, enables you to
specify print settings for the current document. The available
settings are grouped under the Page Setup and Advanced tabs.
See below for a brief description of each available setting.
Page Setup tab settings
Paper Size
Select the desired paper size. This setting must match the size of
the paper loaded in the printer. The paper sizes that are available
will differ according to the printer. The default setting is either A4
or Letter, depending on your country of purchase.
To Next Page
Loading...
