101
1. Turn on the projector and display an image.
2. Adjust the slider until the image is evenly rectangular.
After correction, your image is slightly smaller.
Parent topic: Image Shape
Related tasks
Turning On the Projector
Correcting Image Shape with the Keystone Buttons
You can use the projector's keystone correction buttons to correct the shape of an image that is
unevenly rectangular on the sides.
Note: You can use the keystone buttons to correct the image up to 30° left, right, up, or down.
Note: You cannot combine keystone correction with other correction methods at the same time.
Note: If you change the Screen Type or Screen Position settings, your image adjustments are reset.
To Next Page
Loading...
Need help?
General
