263
Power light Status light Laser light Temp light Status and solution
Off Flashing blue Off Flashing
orange
A fan or sensor has a problem. Turn
the projector off, unplug it, and
contact Epson for help.
Off Flashing blue Flashing
orange
Off Internal projector error. Turn the
projector off, unplug it, and contact
Epson for help.
Varies Flashing blue Flashing
orange
Varies Refresh Mode is in progress.
Wireless LAN Light Status
The Wireless LAN light indicates the following:
• Blue: Wireless LAN connection is available and operating normally.
• Flashing blue (quickly): Connecting to a device.
• Flashing blue (slowly): An error has occurred. Turn off the projector and restart it.
• Off: Wireless LAN connection is not available. Make sure the Wireless LAN Power setting is set to
On in the projector's Management menu.
Note: If the lights display a pattern not listed in the tables above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Where to Get Help (U.S. and Canada)
Administration Settings - Management Menu
Feature Settings - Operation Menu
Related tasks
Cleaning the Air Filter and Vents
Replacing the Air Filter
Using the Projector Menu Displays
The projector displays descriptions in the menu system to help you navigate the projector's settings. The
descriptions appear on the right side of the screen as you scroll the menu settings.
To Next Page
Loading...
Need help?
General
