Epson EX11000 - Correcting Image Shape with Arc Correction

107
7. Press the arrow buttons to adjust the image shape as necessary. Press Enter to return to the
area selection screen.
8. When you are finished, press Esc.
The Geometry Correction setting is now set to Quick Corner in the projector's Installation menu. If you
press the keystone adjustment buttons on the control panel, the area selection screen appears.
Parent topic: Image Shape
Related references
Installation Settings - Installation Menu
Related tasks
Turning On the Projector
Correcting Image Shape with Arc Correction
You can use the projector's Arc Correction setting to adjust the curve or arc of the sides of your image.
Note: If you change the Screen Type or Screen Position settings, your image adjustments are reset.