189
Parent topic: Projector Security Features
Adjusting the Color Convergence (Panel Alignment)
You can use the Panel Alignment feature to manually adjust the color convergence (the alignment of the
red and blue colors) in the projected image.
Note: You can adjust only the red or blue color convergence. Green is the standard color panel and
cannot be adjusted.
Note: You can adjust the pixels up to ±3 pixels in 0.125 pixel increments.
Note: Image quality may decline after you perform Panel Alignment.
Note: Images for pixels that extend beyond the edge of the projected screen are not displayed.
1. Turn on the projector.
2. Press the Menu button.
3. Select the Display menu and press Enter.
To Next Page
Loading...
