151
Note: When you use the effects feature, select Refresh Mode > Start on the Management menu
periodically. You can't add effects when using Edge Blending.
1. In Content Playback mode, press the Menu button on the remote control and select the Operation
menu.
2. Select Overlay Effect and press Enter.
3. Select the Overlay Effect setting and select On.
4. Select the Shape Filter setting and adjust the options as necessary.
• Shape: Select a circle, rectangle, or other shape effect
Note: You can add your images as customized shapes using the Epson Projector Content
Manager software. See the Epson Projector Content Manager Operation Guide for details.
• Filter Effect: Select an option to mask the inside or outside of the shape
• Size: Set the shape size
• Position: Set the shape position
Note: When you use a customized shape, you cannot change the Size and Position settings.
5. Select the Color Filter setting and adjust the options as necessary.
• Color Filter: Select the color
• Custom: Adjust red, green, or blue individually
6. Select the Lightness setting and adjust the brightness level.
7. Press the Menu button to exit.
To Next Page
Loading...
Need help?
General
