To Next Page

To Previous Page

2. Select the Network menu and press Enter.

3. Select Network Settings and press Enter.

Note: If the Remote Password and the Web Control Password have not been set, a screen appears

prompting you to set them. Enter passwords up to 32 characters long. These passwords are used

for accessing the projector over a network, and you do not need to enter them to access the Network

Settings menu after you set them.

4. Do one of the following:

• To connect directly to a wireless device (Simple AP mode), select Passphrase, press Enter,

and enter a passphrase from 8 to 63 characters long. When you are done, return to the Network

Settings screen, select Set, and follow the on-screen instructions to save your settings and exit

the menus. Skip the rest of these steps.

• To connect to a device via a wireless network router (infrastructure mode), select the Wireless

LAN menu and press Enter. Continue with the next step.

5. Select the Security setting and press Enter.

Epson EX11000 User Manual

Questions and Answers: