Control Panel 129
4
4
4
4
4
4
4
4
4
4
4
4
4. Press the ItemD button or the ItemU button to select the menu
parameters which you wish to change. Press the Set button
to scroll through the values within the selected parameter
until you find the desired setting. After setting the selected
parameter to the desired setting, you may continue to make
changes to other parameters by pressing the ItemD button or
the ItemU button.
5. Turn off the printer and exit the lock-out setting mode.
Note:
You may exit the lock-out mode by turning off the printer at any
time. Any settings you have made remain in effect until you change
them again.
See “Turning on or off the lock-out mode” on page 126 for
instructions on how to turn the lock-out mode on after you change
the lock-out mode setting.
To Next Page
Loading...
