Problem Solver 141
5
5
5
5
5
5
5
5
5
5
5
5
The printer does not load continuous paper or does not feed it
properly.
Cause What to do
The paper release lever is not
set correctly.
Set the paper release lever to the position
for the paper source you want to use. See
“Setting the Paper Release Lever” on
page 11 for instructions.
Single-sheet paper is in the
paper path.
Press the Load/Eject button to eject the
sheet.
Continuous paper is not
loaded properly.
See “Loading Continuous Paper” on
page 14 for instructions on loading
continuous paper with the tractor you
want to use.
The paper-thickness lever is
not set correctly.
Set the paper-thickness lever to match
the thickness of your paper. See
“Adjusting the Paper-Thickness Lever”
on page 12 for instructions.
The printer does not feed continuous paper to the standby
position.
Cause What to do
You have not torn off the
printed pages before pressing
the Load/Eject button.
Tear off the printed pages at the
perforation. Then press the Load/Eject
button to feed the paper backward to the
standby position.
To Next Page
Loading...
