Paper Handling 17
2
2
2
2
2
2
2
2
2
2
2
2
3. Insert the tractor into the printer’s mounting slots and press
down both ends of the tractor to make sure that it is firmly
seated.
See “Loading paper with the front push tractor” on page 17 for
instructions on loading continuous paper with the front push
tractor.
Loading paper with the front push tractor
When using the push tractor, it is a good idea to set the Auto
tear-off function in the Default Setting mode to On. See “About
Your Printer’s Default Settings” on page 117 for more
information.
Follow these steps to load paper using the front push tractor:
1. Make sure the printer is turned off.
To Next Page
Loading...
