Paper Handling 39
2
2
2
2
2
2
2
2
2
2
2
2
13. If necessary, follow the steps in “Adjusting the top-of-form
position” on page 64 to adjust the current position of the
paper.
c
Caution:
Never use the knob to adjust the top-of-form position; this
may damage the printer or cause it to lose the top-of-form
position.
14. Attach the printer cover by inserting the front tabs into the
slots on the printer, then lowering the cover into place. Then
close the paper guide cover.
Note:
For your safety, Epson recommends operating the printer with the
printer cover closed. The printer will function with the printer cover
open or removed, but for maximum safety keep the cover closed.
15. Send a print job to the printer. The printer starts printing from
the top-of-form position. After you finish printing, open the
paper guide cover, then tear off the printed document at the
perforation nearest the paper exit slot.
Removing paper from the pull tractor
Follow these steps to remove continuous paper from the pull
tractor:
To Next Page
Loading...
