Paper Handling 47
2
2
2
2
2
2
2
2
2
2
2
2
4. To feed the continuous paper backward out of the printer and
into the standby position, press the Load/Eject button.
To remove the remaining paper from the printer, press the
Load/Eject button to feed the paper backward to the standby
position. Then open the sprocket covers of the tractor and remove
the paper.
c
Caution:
Always tear off your printed document before you press the
Load/Eject button. Reverse feeding several pages at a time may
cause a paper jam.
Advancing paper to the tear-off position automatically
To automatically advance your printed documents to the tear-off
position, turn on the auto tear-off mode and select the appropriate
page length for continuous paper in the Default Setting mode. See
“Changing default settings” on page 124 for instructions on how
to change the default settings.
When auto tear-off is on, the printer automatically advances the
paper to the tear-off position whenever it receives a full page of
data or a form feed command followed by no more data.
To Next Page
Loading...
