Epson LX 300+II Reference Guide

16 Paper Handling
To feed continuous paper backward to the standby position,
where you can remove the paper, first tear off any printed
sheets. Then press the Load/Eject button. Open the sprocket
covers on the tractor and remove the paper.
c
Caution:
Always tear off your printed document before you press the
Load/Eject button. Reverse feeding several pages at a time
may cause a paper jam.
Switching between continuous paper and single sheets
If you want to switch to single sheets while continuous paper is
loaded in the push tractor position, follow these steps:
1. Tear off your printed document.
c
Caution:
Always tear off your printed document before you press the
Load/Eject button. Reverse feeding several pages at a time
may cause a paper jam.
2. Press the Load/Eject button to feed the paper backward to
the standby position.
3. Push the paper release lever back to the single sheet
position.
4. Follow the instructions on page 26 to load single sheets.
To switch back to continuous paper, follow these steps:
1. Press the
Load/Eject button to eject any sheet in the printer.
2. Move the paper release lever to the continuous paper
position.
3. Press the
LF/FF button to load the paper on the tractor.

Epson LX 300+II Specifications

Power

rated voltage	120V AC
input voltage range	99 to 132V, 198 to 164V
rated frequency range	50 to 60 Hz
input frequency range	49.5 to 60.5 Hz
power consumption	Approx. 23W (ISO/IEC 10561 Letter Pattern)

Performance

print speed high speed draft	337 cps (12 cpi)
print speed draft	225 cps (10 cpi)
print speed near letter quality	56 cps (10 cpi)
sound level	49 dBA (ISO 7779 pattern)
mtbf	6, 000 POH (25% duty cycle)
print head life	400 million characters
ribbon life	3 million characters (draft, 10 cpi, 14 dots/character)

Weight and Dimensions

carton dimensions	14.5" x 17.6" x 8.6" (W x D x H)
carton weight	12.10 lb
height	6.26" (159 mm)
width	14.42" (366 mm)
depth	10.84" (275 mm)
weight	9.7 lb (4.4 kg)