Paper Handling 15
Removing a printed document from the push tractor
Follow these steps to remove the printed document:
1. Press the Tear Off (Font) button. The Tear Off (Font) lights
start flashing. (This indicates that your paper is at the
current tear-off position.)
2. Open the printer cover and tear off the printed document
using the tear-off edge on the paper tension unit.
Note:
If your paper’s perforation is not properly aligned with the tear-off
edge, you can adjust the tear-off position using the Micro Adjust
feature. See “Adjusting the tear-off position” on page 25.
c
Caution:
Never use the paper feed knob to adjust the tear-off position; this
may damage the printer or cause it to lose the tear-off position.
3. Close the printer cover.
When you resume printing, the printer automatically feeds the
paper back to the top-of-form position and starts printing.
To Next Page
Loading...
