Installation
T his chapter describes how to unpack, set up, and connect your
projector to other equipment. The projector must be connected to a
computer or a video source such as a VCR, camcorder, or laser disc
player. For example, you may want to connect the projector to both
your computer and a video source, or set up the projector for one or
more of the following:
l Connect the mouse cable to use the remote control as a wireless
mouse.
l Provide audio for one or both image sources. The audio source can
be the computer, video source, or another device such as a stereo.
l Connect to an external speaker or PA system to amplify the audio.
To Next Page
Loading...
