Saving and Recalling Effects Key Button Assignments
To save Effects button assignments, click Execute.
To save multiple sets of button assignments, click Registration and
specify a name for the current settings.
To recall a saved set of assignments, select its name from the Setting
menu.
To delete a set of assignments from the Registration List, select its
name and then click Delete.
To exit without saving the settings, click Exit.
Changing the COM Port Assignment
If you did not select the correct COM (communication) port when
setting up the software, or if you have changed the COM port to
which the projector is connected, you can change the COM port
setting from the ELP Link II software.
From the Option menu, select COM Port, then choose a new COM
port from the list provided.
Using the Software
To Next Page
Loading...
Need help?
General