Epson PowerLite 5000 - Installing the Software from Windows 95

8. You see a prompt to create the installation directory you specified
in step 5. Press Y (yes).
Installing the Software from Windows 95
Perform the following steps to set up the software for Windows 95.
1. Insert the Link II for Windows installation diskette into a diskette
drive (A: or B: as appropriate).
2. Click Start
3. Click the Run menu option. The Run dialog box appears:
4. Type A:\SETUP (or B:\SETUP
as appropriate), then press Enter
or click OK. The ELP Link II introduction appears.
5. Press C to continue.
6. To accept the default location for where the software should be
installed, press C to continue. Otherwise, enter a new directory
name and then press C.
4 l Using the ELP Link II Software