Epson PowerLite 5000 - Replacing the Lamp

4. The filter is attached to the inside of the filter cover. It is
recommended that you use a small vacuum cleaner designed for
computers and other office equipment to clean the filter. If you
don’t have one, use a dry, lint-free cloth.
If the dirt is difficult to remove or if the filter is torn, replace it.
Contact your PowerLite 5000 dealer or call EPSON Accessories at
(800) 873-7766 in the United States and Canada to obtain a new
one. Request part number 1023658.
Replacing the Lamp
The projector lamp typically lasts for about 2000 hours of use. It is
time to replace the lamp when:
l The projected image gets darker or starts to deteriorate.
l The projection lamp indicator (orange and red, flashing
alternately) is red.
Contact your PowerLite 5000 dealer or call EPSON Accessories at
(800) 873-7766 in the United States and Canada for a replacement
lamp.
+
warning: Let the lamp cool before replacing it.
1. Turn off the projector and unplug the power cable.
2. Turn the projector over so you can access the lamp cover.
5 l Maintenance