Connecting to a PC Laptop Computer
Before beginning, turn off the projector and computer if they are on.
1.
Connect the video cable.
Note: Laptop configurations vary. See your computer manual for the
location of the ports needed to connect your PowerLite 5000 projector.
a.
Connect either end of the video cable to the projector’s
Computer In 1 port. (Use the Computer In 2 port if you are
connecting a second computer.)
b. Connect the other end of the video cable to the laptop’s video
(monitor) port.
c. Tighten the screws on all connectors to make sure they are
fastened securely.
1 l Installation
To Next Page
Loading...
Need help?
General