Additional Components
Depending on how you plan to use the projector, you may need
additional components:
To receive an S-video signal, you need an S-video cable. (One is
usually provided with your video device.) A separate cable is
required for each video source.
Video and audio cable to connect a second computer
To connect the projector to a Macintosh Power-Book, you need a
video-out cable. (One is provided for all new Power-Books that
have video-out capability.) If y
our
Power-Book does not include
one, see your Macintosh dealer.
To connect the projector to an external sound system, you need an
RCA-to-3.5 mm stereo audio cable. You can obtain one from your
computer dealer.
To connect the mouse cable to your computer, you may require a
special connector, cable, or other components. You can obtain
these items from your computer dealer.
Note: You can connect a Kensington MicroSaver anti-theft device in
the hole on the right side of the projector.
Contact your local computer
dealer.
Unpacking the Projector
To Next Page
Loading...
Need help?
General