Connecting to a Desktop Macintosh
Before beginning, turn off the projector and Macintosh if they are on.
1.
Connect the video cables.
video-out cable
Note: Macintosh computer configurations vary. See your computer
manual for the location of the ports needed to connect your
PowerLite 5000 projector.
a.
Connect either end of the video cable to the projector’s
Computer In 1 port. (Use the Computer In 2 port if you are
connecting a second computer.)
b. Remove the small cover and set the DIP switches on the
Macintosh video adapter in accordance with the resolutions
you want to use (such as 16 inch mode).
1 l Installation
To Next Page
Loading...
