c. Connect the small terminal of the Macintosh video adapter to
the other end of the video cable.
d.
Disconnect the monitor cable from the video port on the back
of the Macintosh and connect the video cable (with Macintosh
video adapter attached) to the video port. If a video-out cable
was supplied with your Macintosh, connect one end to the
video adapter and the other end to the video port on your
Macintosh.
e.
If you wish to view or check images on the computer’s
monitor, attach the Macintosh monitor adapter to the monitor
cable and connect the monitor to the projector’s Monitor
port.
f. Tighten the screws on both connectors to make sure they are
fastened securely.
Connecting to a Computer
To Next Page
Loading...
Need help?
General