infrared receiver,’ or other equipment emitting infrared energy is present
(such as a radiant room heater). Remove these conditions to use the remote
control or control the projector from a computer.
This table summarizes the functions on the remote control.
Button Function
Video Switches from computer to video.
Menu Displays or hides the menu.
Computer Switches between Computer 1 and Computer 2, and from video
to computer.
Auto Automatically adjusts the computer’s graphic signal to optimize it
for projection.
Pointer button Use the pointer button to navigate the menus or use the remote
as a mouse pointer when the projector is connected to the
computer with all cables in the ELP Link II communications kit
Effects buttons Use to display special effects in conjunction with the ELP Link II
software.
Top multi-purpose Acts as a right mouse click, registers a menu selection, and
button selects other custom functions.
Bottom
Acts as a left mouse click, registers a menu selection, and selects
multi-purpose other custom functions.
button
Blank Clears the screen of special effects and switches to a black
display.
2 l Using the Projector
To Next Page
Loading...
Need help?
General