Epson ProSix S5 Series - Connector Sub Plate

Maintenance 3. Covers
S5 Rev.5 95
3.6 Connector Sub Plate
Remove the bolts, and then remove the Connector Sub Plate.
Tool: Hexagonal wrench (width across flats: 3 mm)
Hexagon socket head cap bolts: 4-M4×10
Tightening torque 1.4 N·m (0.14 kg·m)
For Protection model
Remove the bolts, and then remove the Connector Sub Plate.
Remove the gasket, the spacer, and the seal washer together with the cover.
Tool: Hexagonal wrench (width across flats: 3 mm)
Hexagon socket head cap bolts: 4-M4×15
Tightening torque: 1.4 N·m (0.14 kg·m)