EasyManua.ls Logo

Epson ProSix S5 Series - Model Number

Epson ProSix S5 Series
211 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setup & Operation 2. Specifications
S5 Rev.5 19
2.2 Model Number
S5 - A 701 S R - UL
UL specification
UL : UL compliant
: Non UL compliant
Type
: Table Top mounting
W : Wall mounting
R : Ceiling mounting
Environment
S : Standard model
C : Clean-room model
P : Protection-model
Arm length
7 : 706 mm (Model name: S5)
9 : 895 mm (Model name: S5L)
Environment
Cleanroom-model
Cleanroom-model Manipulator includes additional features that reduce dust emitted by
the Manipulator to enable use in clean room environments.
Cleanliness level : Class ISO 3 (ISO14644-1)
In previous criteria;
Clean Class: 10 or its equivalent. Amount of Dust (0.1 µm
diameter or larger) in 28317 cm
3
(1cft) sample-air around the
center of the motion rang: 10 particles or less.)
Exhaust System : Exhaust port diameter:
Inner diameter: ø12 mm / Outer diameter: ø16 mm
Exhaust tube : Polyurethane tube
Outer diameter: ø12 mm (Inner diameter:ø8 mm)
or Inner diameter ø16mm.
Recommended exhaust flow rate : Approx. 1000 cm
3
/s (Normal)
Protection-model (IP65)
The Protection-model Manipulators operate under adverse conditions with dust and oily
smoke.
IP (International Protection) for the Protection-model Manipulator indicates
International Standard of the protection level against dust and water.(IEC 60529, JIS
C0920)
Degree of protection
IP65
Dust : 6 No ingress of dust.
Water : 5
Water projected by a nozzle against enclosure from any direction
shall have no harmful effects.
For details on the specifications, refer to Setup & Operation: 2.4 Specifications.

Table of Contents

Related product manuals