Maintenance 2. Periodic Inspection
S5 Rev.5 75
2. Periodic Inspection
Performing the inspection steps properly is essential to preventing trouble and maintaining
safety. This section describes the schedule for maintenance inspections and the
procedures.
Be sure to perform the maintenance inspections in accordance with the schedule.
2.1 Schedule for Maintenance Inspections
Inspection tasks are divided into five stages: daily, 4 months, 24 months, 48 months, and
96 months. Move up the regular checks when the Manipulator has been used for the
following amount of time.
Interval between Inspections
Accumulated Operating Time
To Next Page
Loading...
Need help?
General
