Epson RC700 Series Maintenance Manual

Maintenance 1. Safety Precautions on Maintenance
RC700 Series Maintenance Rev.3 3
1. Safety Precautions on Maintenance
Important safety considerations are indicated throughout the manual by the following
symbols. Be sure to read the descriptions shown with each symbol.
WARNING
This symbol indicates that a danger of possible serious injury or death
exists if the associated instructions are not followed properly.
WARNING
This symbol indicates that a danger of possible harm to people caused by
electric shock exists if the associated instructions are not followed
properly.
CAUTION
This symbol indicates that a danger of possible harm to people or physical
damage to equipment and facilities exists if the associated instructions are
not followed properly.

NOTE

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4