Epson RC700 Series - Rc700 Du-A

Maintenance 3. Controller Structure
RC700 Series Maintenance Rev.3 11
3.2.4 RC700DU-A
C4, C8, C12, G1, G3, G6, G10, G20, RS
(Motor Driver (5, 6 axis) is not supplied for G1, G3, G6, G10, G20, and RS.)
(Connecters in the red dotted line work properly in any order.)
N6
(Combinations of axes for motor drivers differ from other manipulators.)
(Connecters in the red dotted line work properly in any order.)