Epson RC700 Series Maintenance Manual

Maintenance 3. Controller Structure
RC700 Series Maintenance Rev.3 9
3.2.2 RC700-A
C4, C8, C12, G1, G3, G6, G10, G20, RS
(Motor Driver (5, 6 axis) is not supplied for G1, G3, G6, G10, G20, and RS.)
(Connecters in the red dotted line work properly in any order.)
N2, N6
(Combinations of axes for motor drivers differ from other manipulators.)
(Connecters in the red dotted line work properly in any order.)

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4