Epson RC700 Series Maintenance Manual

Maintenance 4. Backup and Restore
RC700 Series Maintenance Rev.3 13
4.3 Backup
Backup the Controller status from the EPSON RC+ 7.0.
(1) Select EPSON RC+ 7.0 menu-[Tools]-[Controller] to display the [Controller Tools]
dialog.
(2) Click the <Backup Controller…> button to display the [Browse For Folder] dialog.
(3) Specify the folder to save the backup data. Create a new folder if desired.
(4) Click the <OK> button. A folder is created in the specified folder containing the
backup data with a name in the following format.
B_ RC700_ serial number_ date status was saved
→ Example: B_RC700_12345_2013-10-29-092951
CAUTION
■
Do not edit the backup files. Otherwise, operation of the robot system after data
restoration to the Controller is
not assured.

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4