Epson RC700 Series Maintenance Manual

Maintenance 6. Alarm
RC700 Series Maintenance Rev.3 29
6.1.1.2 Controller Battery
The C
ontroller battery is automatically configured at the first connection with the EPSON
RC+7.0 after upgrading to the firmware version 7.1.0.x and later.
If you are using the Controller before the version upgrade, there may be a difference in the
alarm information. In such case, edit the alarm information. For details on the alarm
information editing, refer to 6.1.3 How to Edit the Alarm Information.
6.1.2 How to View the Alarm Information
The configured alarm information can be checked in the EPSON RC+ 7.0.
(1) Select the EPSON RC+ 7.0 menu-[Tools]-[Maintenance] to display the [Controller
Tools] dialog box.
(2) Click the <Controller Alarms> button and display the [Controller Alarms] dialog
box.
There are three states of the alarm.
Display
Status
OK
An alarm is configured. An alarm is not occurring.
Expired
An alarm is occurring. Replacement is required.
Not set
An alarm is not configured.

NOTE

NOTE

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4