Epson RC700 Series Maintenance Manual

Maintenance 4. Backup and Restore
16 RC700 Series Maintenance Rev.3
Restore the system configuration saved using Backup Controller only for the same
system.
When different system information is restored, the following warning message appears.
Click the <No> button (do not restore data) except for special situations such as
Controller replacement.
When restoring the backup which includes the data of the robot configured to the Drive
Unit, be sure to restore the data while the Drive Unit is connected and turned ON.
When restoring the backup including unsupported robot information to the target
Controller, an error occurs.

NOTE

NOTE

NOTE

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4