Epson RC700 Series Maintenance Manual

Maintenance 8. Maintenance Parts Replacement Procedures
50 RC700 Series Maintenance Rev.3
Battery
Installation
(1)
Set a new battery.
Secure the battery with the mounting tab.
(2)
Connect the battery cables.
(3)
Insert the battery bracket and
secure it with the screws. (Mounting screw ×2)
(4)
Connect the power plug
. Turn ON the Controller and make sure that the
Controller
starts properly without any vibration or abnormal noise.

NOTE

Epson RC700 Series Specifications

General

Model	RC700 series
Category	Controller
Programming Language	SPEL+
Safety Standard	ISO 10218-1
Type	Robot Controller
Communication Interface	Ethernet, RS-232, USB
Operating Temperature	0°C to 45°C (32°F to 113°F)
Humidity	20% to 80% (non-condensing)
Number of controllable robots	4