Epson RC700 Series - Page 81

Maintenance 8. Maintenance Parts Replacement Procedures
RC700 Series Maintenance Rev.3 67
DPB
Installation
(1)
Insert the
DPB to the chassis.
(2)
Fix the DPB with screws.
(Mounting screw ×12)
(3)
RC700
-A, RC700DU-A: Mount the rear plate. (Mounting screw ×5)
(4)
RC700
-A, RC700DU-A: Connect the fan 2 extension connector.
(5)
Connect the eight connectors to the DPB.
(6)
Mount the MDB clamp 3. (Mounting screw
×2)
(7)
Mount the DMB.
Refer to
8.6 DMB
(8)
Mount the top plate. (Mounting screw
×6)
(9)
After connecting the power plug, turn
ON the Controller and check it works
normally without
vibration and abnormal sound.