SC-S30600 Series Revision B
DISASSEMBLY & ASSEMBLY Disassembly and Assembly Procedure 124
Confidential
13. Release the Head FFC from the FFC Holders.
Figure 3-72. Releasing the Head FFC
14. Remove the pieces of acetate tape, and release the Head FFC from the two FFC
clamps.
15. Remove the pieces of acetate tape, and release the cover from the two hooks of the
frame.
16. Disconnect the Head FFC from the connectors (CN404, CN405) on the Sub-D
Board, and remove the Head FFC.
Figure 3-73. Removing the Head FFC
Head FFC
Cover
CN405
CN404
Sub-D Board
FFC Clamps
Acetate tape
Acetate tape
Acetate tape
Hook
Hook