When a film of ink adheres to the
guide section
If a film-like layer of adhered ink cannot be removed
completely using a cleaning stick, remove it using
tweezers.
If no other parts need to be cleaned, proceed to the
following section.
U “Finishing Cleaning” on page 66
When there is lint or dust in the cap
Remove using the tip of the cleaning stick or tweezers.
If no other parts need to be cleaned, proceed to the
following section.
U “Finishing Cleaning” on page 66
SC-S80600 Series/SC-S60600 Series/SC-S40600 Series User's Guide
Maintenance
65
To Next Page
Loading...
Need help?
General