Epson STYLUS PRO 9400 - Page 222

EPSON Stylus Pro 7400/7800/9400/9800 Revision B
Disassembly & Assembly Disassembly Procedure 222
4.2.3.3 I/H COVER R, I/H COVER L
I/H COVER R ASSY.
1. Remove the Ink Cartridges. See Section 4.2.2.1 on page 216.
2. Lower the KNOB, I/C, LOCK LEVER; C593 to the position shown in the figure.
See Figure 4-20.
3. Remove the screw that secures the KNOB, I/C, LOCK LEVER; C593 and remove
it. See Figure 4-20.
 One C.C.P. M3 x 8 screw (black)
4. Remove the two screws that secure the I/H COVER R ASSY. See Figure 4-20.
 Two C.B.S. M3 x 8 screws
5. Release the two tabs that secure the I/H COVER R ASSY. and remove it. See
Figure 4-20.
I/H COVER L ASSY.
1. Remove the Ink Cartridges. See Section 4.2.2.1 on page 216.
2. Lower the KNOB, I/C, LOCK LEVER; C593 to the position shown in the figure.
See Figure 4-21.
3. Remove the screw that secures the KNOB, I/C, LOCK LEVER; C593 and remove
it. See Figure 4-21.
 One C.C.P. M3 x 8 screw (black)
4. Remove the two screws that secure the I/H COVER L ASSY. See Figure 4-21.
 Two C.B.S. M3 x 8 screws
5. Release the two tabs that secure the I/H COVER L ASSY. and remove it. See
Figure 4-21.
Figure 4-20. Removing the I/H COVER R ASSY.
Figure 4-21. Removing the I/H COVER L ASSY.
KNOB, I/C, LOCK
LEVER; C593
Tabs
4: C.B.S. 3x8
3: C.C.P. 3x8 (Black)
2
I/H COVER R
ASSY.
2
I/H COVER L
ASSY.
KNOB, I/C, LOCK
LEVER; C593
4: C.B.S. 3x8
3: C.C.P. 3x8 (Black)
Tabs