EPSON Stylus CX7300/CX7400/DX7400/NX200/TX200 series/SX200 series/Stylus CX8300/CX8400/DX8400/NX400/TX400 series/SX400 series Revision C
PRODUCT DESCRIPTION Control Panel 23
Confidential
Print Index Sheet Normal Starts printing an index sheet.*
The paper size / paper type are changed to A4 / plain paper
automatically. Initializes the panel settings and turns off the 7-
segment LED.
Disabled Disabled • During printing
• During scanner operation
• During head cleaning
• During ink cartridge replacement
• When an error except memory card
error, index sheet error is occurring
• When print data is spooled
• When printing is being stopped or a
print job is being canceled
• When the button is pressed two or
more times after a memory card error
occurred.
Error • Displays a memory card error when no memory card or a
non-supported formatted memory card is detected, or when
no image data is found in the memory card.
• When an index sheet error is occurring, cancels the error
and retrys to print the index sheet.
• When a paper-out error is occurring, performs paper feed
operation. If the paper is fed successfully, cancels the error
and prints the index sheet.
• When a paper jam error is occurring, performs paper
ejection operation. If the paper is ejected successfully,
cancels the error and prints the index sheet.
Disabled When a camera direct error is occurring,
cancels the error and returns to the index sheet
print process.
Print from Index
Sheet
Normal Reads an index sheet and starts printing images. Disabled Disabled • During printing
• During scanner operation
• During head cleaning
• During ink cartridge replacement
• When print data is spooled
• When printing is being stopped or a
print job is being canceled
• When the button is pressed two or
more times after a memory card error
occurred
Error Same as the [Print Index Sheet] button other than the cases
below.
• When the index sheet cannot be read normally, cancels the
print job and displays an index sheet error.
• When the button is pressed after an index sheet error is
displayed, cancels the error display and resumes the print
job.
Disabled When a camera direct error is occurring,
cancels the error and starts reading the index
sheet.
Copies Normal Sets the number of copies.
Default value is 1 copy.
1 to 9 sheets and “≡” (20 sheets continuously) can be set.
Saves the set value when starting copying. Does not save
when the power is Off. Returns the setting to the default when
the power is turned Off or the mode is changed. The 7-
segment LED displays the set number of copies and decreases
the number each time a copy is made. When the copy job is
finished, the number returns to the set value.
Cancels the DPOF mode
and returns to standby
mode.
The set number of copies
is returned to the default,
and the paper type and
size settings are returned
to the previous ones.
Disabled • During printing
• During scanner operation
• During head cleaning
• During ink cartridge replacement
• When an error is occurring
• When print data is spooled
• When printing is being stopped or a
print job is being canceled
Error Disabled Disabled When a camera direct error is occurring,
cancels the error, and goes to the standby
mode. The set number of copies is returned to
the default, and the paper type and size
settings are returned to the previous ones.
Table 1-19. CX7300/TX200 series Buttons & LEDs Functions
Button
Printer
Status
Functions
Button Operation Disabled Cases
During Normal Printing
During DPOF
Printing
During Camera Direct Printing
Continued on next page
Note * : After printing an index sheet, the paper type and size settings are returned to the previous ones.
To Next Page
Loading...
Need help?
General