111
Chapter 5 Handling
5
Handling
This chapter describes basic handling of the printer.
Installing and Replacing Roll Paper
1
Open the roll paper cover.
2
Remove the used roll paper core, if any.
WARNING
Do not open the roll paper cover during printing.
The printer may be damaged.
Do not touch the manual cutter with your hands when installing or replacing the roll
paper.
Otherwise, you may be injured because the manual cutter blade is sharp.
Use roll paper that meets the printer specification. For details about paper specification, see
"Paper Specifications" on page 129.
Paper must not be pasted to the roll paper spool.
When the roll paper cover cannot be opened, see "Removing Jammed Paper" on page 114.
To Next Page
Loading...
Need help?
General