59
Chapter 3 Advanced Usage
3
Software Setting Mode Functions
USB power saving function
Disabled
Enabled (default setting)
Paper sensors to output paper end signal
Roll paper out detector (default settings)
Disabled
Error signal output
Enabled (default setting)
Disabled
Automatic paper reduction
Extra upper space reduction
Disabled (default setting)
Enabled
Extra lower space reduction
Disabled (default setting)
Enabled
Line space reduction rate
Not reduced (default setting)
Reduce 25%
Reduce 50%
Reduce 75%
Line feed reduction rate
Not reduced (default setting)
Reduce 25%
Reduce 50%
Reduce 75%
The USB power-saving function is valid only when the USB interface communication condition is
set to the vendor-defined class and the system configuration is set so that the USB driver can
support the USB power-saving function.