143
Appendix
Bluetooth Low Energy Technology Advertising
Introduction
When you connect the BT820 from Lairedtec to the USB A port on the TM-T88VI-iHUB and turn it on, the
Bluetooth low energy technology Advertising Packet is transmitted. By default, the TM-T88VI-iHUB transmits
the packet according to the iBeacon Format from Apple. You can also change the data that is transmitted by
following the steps in
"Changing the Bluetooth Low Energy Technology Advertising Packet" on page 144.
Glossary:
Dongle specifications
Manufacturer: Laird Tech
Model name: BT820
For setting methods and settings, see the TM-T88VI Utility User's Manual.
Procedure
When turning on the TM-T88VI-iHUB, the Bluetooth adapter connected to the USB Type A port is enabled.
If you install the Bluetooth adapter after turning on the printer, this is not enabled.
Bluetooth Low Energy Technology Advertising Packet Format
In the TM-T88VI-iHUB, the iBeacon format is used by default for the Bluetooth low energy technology Adver-
tising Packet.
The UUID for the TM-T88VI-iHUB is "fac1ba2f-61a2-4d83-9a8c-60087c232569".
The user can edit the following specifications in the iBeacon format: UUID, Major number, Minor number, and
Measured Power.
Term Description
Bluetooth Low Energy Technology Advertising The name of this function.
Bluetooth Low Energy Technology Advertising
Packet
The data sent by this function from the printer.
Bluetooth adapter The BT820 from Lairedtec
A USB dongle to connect to the USB Type A port.
iBeacon The format stipulated by Apple for Bluetooth low energy
technology Advertising Packets
When using the default settings for the TM-T88VI-iHUB (Bluetooth
adapter installed in the printer and the printer is on), the Bluetooth
low energy technology Advertising Packet is transmitted in
iBeacon format.
To Next Page
Loading...
Need help?
General