68
7
Click the [Reset] button on the Web page displayed after sending.
The sent contents are enabled.
Depending on the changes, such as the IP address, the connection with the setting computer may be
cut and the EpsonNet Config window may not be displayed. To reconnect, you need to set the net-
work settings of the setting computer to the same network segment as the printer for which settings
were changed.
MAC Address Confirmation
You can check the printer's MAC address using the following procedures.
Printing the status sheet
Label attached on the product
A printer self-test (May not be supported by some TM printers.)
Using EpsonNet Config to confirm
Using a Web browser to confirm (EpsonNet Config (Web version) function)